View DF9A-11P-1V_359801.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
DF9 Series
sFeatures
1. Compliant with the VESA FPDI-1 Standard Interface Connector
The 31 and 41 contact connectors comply with the standard connector specification for the flat panel display interface, which U.S VESA. has selected as FPDI-1. VESA: Video Electronics Standards Association FPDI-1: Flat Panel Display Interface
2. Perfect Mis-insertion Prevention
The mating area is designed in a trapezoidal structure, and perfectly prevents the mis-insertion despite the miniature size.
3. Equipped with Easy Lock Mechanism
The easy lock mechanism assures the firm insertion and extraction properties as well as the insertion/extraction feeling touch.
4. Smooth Insertion and Extraction Feeling
The contact is constructed without the material fragible surface in the contact portion, and provides a smooth insertion and use feeling.
5. Setting Two Type Platings as Standard
Two type platings, tin plated and gold plated, are prepared, and either appropriate plating can be selected under cost and use conditions.
Structure to Prevent Mis-insertion
Lock Mechanism
sApplications
LCD (Liquid Crystal Display), Mobile phone, Note PC
A278
sProduct Specifications
Rating Current rating 0.5A Voltage rating150V AC Operating Temperature Range -45 to +125c (Note 1) Storage Temperature Range -10 to +60c (Note 2) Operating Humidity Range 40 to 80% Storage Humidity Range 40 to 70%
Item 1. Insulation Resistance 2. Withstanding voltage 3. Contact Resistance 4. Vibration 6. Temperature Cycle 500M ohms min.
specification 100V DC 250V AC/1 minute 100mA
Condition
No flashover or insulation breakdown.
50m ohms max.
No electrical discontinuity of 1s or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5. Humidity (Steady state) Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40c and humidity of 90% to 95% Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. (-55c: 30 minutes 5 to 35c: 10 minutes 85c: 30 minutes 5 to 35c: 10 minutes) 5 cycles Tin plating: 30 cycles Gold plating: 100 cycles 7. Durability (Mating/un-mating) Contact resistance: 50m ohms max: 8. Resistance to Soldering heat No deformation of components affecting performance.
Reflow: At the recommended temperature profile Manual soldering: 300c for 3 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Receptacle/Header Part Insulator Contact Metal fitting Material Polyamide Phosphor copper Brass Finish Beige Tin plated or gold plated Tin plating Remarks UL94V-0 ------- -------
Note:The gold plated product contact area is plated with gold, and lead plated with tin-lead.
s Ordering Information
Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog page A280~A284.
qReceptacle/Header
DF9
q q Series Name w Type : DF9
# - * S - 1 V (**)
w e r t y u r Connector Type S: Receptacle Fitting Boss P: Header t Contact Pitch y Contact Type V: Straight SMT u Contact Surface Finish/Packaging Type (20): Tin plated, tube packaging (54): Gold plated, tube packaging (22): Tin plated, embossed tape packaging (59): Gold plated, embossed tape packaging : 1mm
Blank A B C e Number of Contacts 9 to 25,31,41,51
K K
K K
*Refer to page A284 for the bottom entry type (DF9L).
A279
sReceptacle
With metal fitting
With boss
[Specific No.] _ **, (**) (20) : Tin plated, tube packaging (54) : Gold plated, tube packaging (22) : Tin plated, embossed tape packaging (59) : Gold plated, embossed tape packaging Unit: mm Part Number
CL No. Number of Contacts A B C D E Tube Packaging Spec Spec. Spec. Spec. Quantity . (20) (54) (22) (59) 46 42 39 36 33 31 29 28 26 22 18 15 K K K K K K K K K K K _ K K K K K K K K K K K K K K K K K K K K K K K _ K K K K K K K _ K K K K Remarks
7.1 10.1 4 3 8.3 9 DF9- 9S-1V (**) 540-0054-0-** 8.1 11.1 5 4 9.3 11 DF9-11S-1V (**) 540-0055-2-** 10.3 9.1 12.1 6 5 13 DF9-13S-1V (**) 540-0056-5-** 10.1 13.1 7 6 11.3 15 DF9-15S-1V (**) 540-0057-8-** 11.1 14.1 8 7 12.3 17 DF9-17S-1V (**) 540-0058-0-** 12.1 15.1 9 8 13.3 19 DF9-19S-1V (**) 540-0059-3-** 10 13.1 16.1 9 14.3 21 DF9-21S-1V (**) 540-0060-2-** 11 14.1 17.1 15.3 10 23 DF9-23S-1V (**) 540-0061-5-** 12 15.1 18.1 16.3 11 25 DF9-25S-1V (**) 540-0062-8-** 19.3 14 15 18.1 21.1 31 DF9-31S-1V (**) 540-0063-0-** 20 23.1 26.1 24.3 19 41 DF9-41S-1V (**) 540-0213-1-** 25 28.1 31.1 29.3 24 51 DF9-51S-1V (**) 540-0064-3-** Note 1 : Please order the tube packaging product by multiplying the packaging quantity ( pcs.). Note 2 : Please order the embossed tape packaging product per reel. (1000 pcs. per reel) Note 3 : _ are not available. Regarding blank, please contact Hirose sales representative.
With metal fitting With boss With pick and place tape for embossed tape packaging.
sReceptacle
Without metal fitting
With boss
[Specific No.] _ **, (**) (20): Tin plated, tube packaging (54): Gold plated, embossed tape packaging (22): Tin plated, tube packaging (59): Gold plated, embossed tape packaging Unit: mm Part Number
CL No. Number of Contacts A B C D E Tube Package Quantity, Spec Spec. Spec. Spec. Piece/Pack . (20) (54) (22) (59) 59 52 47 43 39 36 34 32 30 24 20 16 K K K K K K K K K K K _ _ _ _ K _ _ _ _ _ K _ K K K K K _ K K _ K K K _ _ _ K K _ K K _ K K K K Remarks
7.1 4 3 8.3 9 _ DF9A-09S-1V (**) 540-0004-1-** 8.1 5 4 9.3 11 _ DF9A-11S-1V (**) 540-0005-4-** 9.1 6 5 10.3 13 _ DF9A-13S-1V (**) 540-0006-7-** 10.1 7 6 11.3 15 _ DF9A-15S-1V (**) 540-0007-0-** 11.1 8 7 12.3 17 _ DF9A-17S-1V (**) 540-0008-2-** 12.1 9 8 13.3 19 _ DF9A-19S-1V (**) 540-0009-5-** 10 13.1 9 14.3 21 _ DF9A-21S-1V (**) 540-0010-4-** 11 14.1 15.3 10 23 _ DF9A-23S-1V (**) 540-0011-7-** 12 15.1 16.3 11 25 _ DF9A-25S-1V (**) 540-0012-0-** 19.3 14 15 18.1 31 _ DF9A-31S-1V (**) 540-0013-2-** 20 23.1 24.3 19 41 _ DF9A-41S-1V (**) 540-0222-2-** 25 28.1 29.3 24 51 _ DF9A-51S-1V (**) 540-0014-5-** Note 1 : Please order the tube packaging product by multiplying the packaging quantity ( pcs.). Note 2 : Please order the emboss packaging product per reel. (1000 pcs. per reel) Note 3 : _ are not available. Regarding blank, please contact Hirose sales representative.
Without metal fitting With boss With pick and place tape for embossed tape packaging.
A280
sReceptacle
With metal fitting
Without boss
[Specific No.] _ **, (**) (20): Tin plated, tube packaging (54): Gold plated, embossed tape packaging (22): Tin plated, tube packaging (59): Gold plated, embossed tape packaging Unit: mm Part Number
CL No. Number of Contacts A B C D E Tube Package Quantity, Spec Spec. Spec. Spec. Pcs./pack . (20) (54) (22) (59) 46 42 39 36 33 31 29 28 26 22 18 15 _ K K K _ _ K K K K K _ K _ _ _ _ K _ _ _ K K K K K K K _ _ K K K K K _ K _ _ K K K _ _ _ K _ K Remarks
10.1 04 08.3 03 09 _ DF9B-09S-1V (**) 540-0125-6-** 11.1 05 09.3 04 11 _ DF9B-11S-1V (**) 540-0126-9-** 12.1 10.3 05 06 13 _ DF9B-13S-1V (**) 540-0127-1-** 13.1 07 11.3 06 15 _ DF9B-15S-1V (**) 540-0128-4-** 14.1 08 12.3 07 17 _ DF9B-17S-1V (**) 540-0129-7-** 15.1 09 13.3 08 19 _ DF9B-19S-1V (**) 540-0247-3-** 16.1 10 14.3 09 21 _ DF9B-21S-1V (**) 540-0131-9-** 17.1 11 15.3 10 23 _ DF9B-23S-1V (**) 540-0132-1-** 18.1 12 16.3 11 25 _ DF9B-25S-1V (**) 540-0133-4-** 21.1 19.3 14 15 31 _ DF9B-31S-1V (**) 540-0143-8-** 26.1 20 24.3 19 41 _ DF9B-41S-1V (**) 540-0216-0-** 31.1 25 29.3 24 51 _ DF9B-51S-1V (**) 540-0145-3-** Note 1 : Please order the tube packaging product by multiplying the packaging quantity ( pcs.). Note 2 : Please order the embossed tape packaging product per reel. (1000 pcs. per reel) Note 3 : _ are not available. Regarding blank, please contact Hirose sales representative.
With metal fitting Without boss With pick and place tape for embossed tape packaging.
sHeader
With metal fitting
With boss
[Specific No.] _ **, (**) (20): Tin plated, tube packaging (54): Gold plated, embossed tape packaging (22): Tin plated, tube packaging (59): Gold plated, embossed tape packaging Unit: mm Part Number
CL No. Number of Contacts A B C D E Tube Package Quantity, Spec Spec. Spec. Spec. Piece/Pack . (20) (54) (22) (59) 46 42 39 36 33 31 29 28 26 22 18 15 K K K K K K K K K K K _ K K K K K K K K K K K K K K K K K K K _ K K K _ K K K K K K K _ K K K K Remarks
04 07.1 10.1 08.3 03 09 DF9-09P-1V (**) 540-0066-9-** 05 08.1 11.1 09.3 04 11 DF9-11P-1V (**) 540-0067-1-** 06 09.1 12.1 10.3 05 13 DF9-13P-1V (**) 540-0068-4-** 07 10.1 13.1 11.3 06 15 DF9-15P-1V (**) 540-0069-7-** 08 11.1 14.1 12.3 07 17 DF9-17P-1V (**) 540-0070-6-** 13.3 08 09 12.1 15.1 19 DF9-19P-1V (**) 540-0071-9-** 10 13.1 16.1 14.3 09 21 DF9-21P-1V (**) 540-0072-1-** 11 14.1 17.1 15.3 10 23 DF9-23P-1V (**) 540-0073-4-** 12 15.1 18.1 16.3 11 25 DF9-25P-1V (**) 540-0074-7-** 15 18.1 21.1 19.3 14 31 DF9-31P-1V (**) 540-0075-0-** 20 23.1 26.1 24.3 19 41 DF9-41P-1V (**) 540-0214-4-** 25 28.1 31.1 29.3 24 51 DF9-51P-1V (**) 540-0088-1-** Note 1 : Please order the tube packaging product by multiplying the packaging quantity ( pcs.). Note 2 : Please order the emboss packaging product per reel. (1000 pcs. per reel) Note 3 : _ are not available. Regarding blank, please contact Hirose sales representative.
With metal fitting With boss With pick and place tape for embossed tape packaging.
A281
sHeader
Without metal fitting
With boss
[Specific No.] _ **, (**) (20) : Tin plated, tube packaging (54) : Gold plated, tube packaging (22) : Tin plated, embossed tape packaging (59) : Gold plated, embossed tape packaging Unit: mm Part Number
CL No. Number of Contacts A B C D E Tube Package Quantity, Pcs./pack 59 52 47 43 39 36 34 32 30 24 20 16 pcs.). Spec Spec. Spec. Spec. . (20) (54) (22) (59) K K K K K K K K K K K _ _ K _ K _ _ _ _ K K K K K K K K _ K K _ K K K _ _ _ K K K _ K _ K K _ K Remarks
04 07.1 08.3 03 09 _ DF9A-09P-1V (**) 540-0016-0-** 05 08.1 09.3 04 11 _ DF9A-11P-1V (**) 540-0017-3-** 06 09.1 10.3 05 13 _ DF9A-13P-1V (**) 540-0018-6-** 07 10.1 11.3 06 15 _ DF9A-15P-1V (**) 540-0019-9-** 08 11.1 12.3 07 17 _ DF9A-17P-1V (**) 540-0020-8-** 09 12.1 13.3 08 19 _ DF9A-19P-1V (**) 540-0021-0-** 14.3 09 10 13.1 21 _ DF9A-21P-1V (**) 540-0022-3-** 11 14.1 15.3 10 23 _ DF9A-23P-1V (**) 540-0023-6-** 12 15.1 16.3 11 25 _ DF9A-25P-1V (**) 540-0024-9-** 15 18.1 19.3 14 31 _ DF9A-31P-1V (**) 540-0025-1-** 20 23.1 24.3 19 41 _ DF9A-41P-1V (**) 540-0223-5-** 25 28.1 29.3 24 51 _ DF9A-51P-1V (**) 540-0026-4-** Note 1 : Please order the tube packaging product by multiplying the packaging quantity ( Note 2 : Please order the emboss packaging product per reel. (1000 pcs. per reel) Note 3 : _ are not available. Regarding blank, please contact Hirose sales representative.
Without metal fitting With boss With pick and place tape for embossed tape packaging.
sHeader
With metal fitting
Without boss
[Specific No.] _ **, (**) (20) : Tin plated, tube packaging (54) : Gold plated, tube packaging (22) : Tin plated, embossed tape packaging (59) : Gold plated, embossed tape packaging Unit: mm Part Number
CL No. Number of Contacts A B C D E Tube Package Quantity, Spec Spec. Spec. Spec. Pcs./pack . (20) (54) (22) (59) 46 42 39 36 33 31 29 28 26 22 18 15 _ K K K _ _ K _ K K K _ K _ _ _ _ K _ _ _ K _ K K K K K _ _ K K K K K _ K _ _ K K K _ _ _ K _ K Remarks
10.1 04 08.3 03 09 _ DF9B-09P-1V (**) 540-0134-7-** 11.1 05 09.3 04 11 _ DF9B-11P-1V (**) 540-0135-0-** 12.1 06 10.3 05 13 _ DF9B-13P-1V (**) 540-0136-2-** 13.1 07 11.3 06 15 _ DF9B-15P-1V (**) 540-0137-5-** 14.1 08 12.3 07 17 _ DF9B-17P-1V (**) 540-0138-8-** 15.1 09 13.3 08 19 _ DF9B-19P-1V (**) 540-0248-6-** 16.1 10 14.3 09 21 _ DF9B-21P-1V (**) 540-0140-0-** 17.1 11 15.3 10 23 _ DF9B-23P-1V (**) 540-0141-2-** 18.1 12 16.3 11 25 _ DF9B-25P-1V (**) 540-0142-5-** 19.3 14 21.1 15 31 _ DF9B-31P-1V (**) 540-0144-0-** 26.1 20 24.3 19 41 _ DF9B-41P-1V (**) 540-0221-0-** 31.1 25 29.3 24 51 _ DF9B-51P-1V (**) 540-0146-6-** Note 1 : Please order the tube packaging product by multiplying the packaging quantity ( pcs.). Note 2 : Please order the emboss packaging product per reel. (1000 pcs./reel) Note 3 : _ are not available. Regarding blank, please contact Hirose sales representative.
With metal fitting Without boss With pick and place tape for embossed tape packaging.
A282
BRecommended PCB mounting pattern
qWith metal fitting, with boss qWithout metal fitting, with boss qMetal fitting, without boss
Note 1 :
If the pattern is included in the shaded area and not treated with resist, it could touch the connector contact .
Note 2 : Please refer to each product size pattern for the universal size on the above patterns (A, B, C, D...).
BApplication Pattern
BTube Size
sCommon to Receptacle and Header
Board
Board
Note 1 : The board to board size 4.3mm in the pattern does not include the soldering paste thickness.
BEmbossed Carrier Tape Dimensions
Unreeling direction
Unit:mm Product Type
DF9-*S/P-1V
Size
DF9A-*S/P-1V
DF9B-*S/P-1V
Number of Contacts 9 to 25 31 41, 51 9 to 13 15 to 25 31 41, 51 9 to 25 31 41, 51
A 24 32 44 16 24 32 44 24 32 44
B -------
28.4 40.4 ------- ------- 28.4 40.4 ------- 28.4 40.4
C 11.5 14.2 20.2 07.5 11.5 14.2 20.2 11.5 14.2 20.2
D 24.4 32.4 44.4 16.4 24.4 32.4 44.4 24.4 32.4 44.4
E 12 12 12 08 12 12 12 12 12 12
A283
sBottom Entry Header
[Specific No.] _ **, (**) (20): Tin plated tube packaging (21): Gold plated embossed tape packaging
Part Number
CL No.
Number of Contacts 31
A 21.64
B 14
C 15
D 19.4
Tube Packaging Spec. Spec. Quantity 22 (29)
K
(21)
K
Remarks
DF9L-31P-1V (**) 540-0215-7-**
With metal fitting
Note 1 : Please order the tube packaging product by multiplying the packaging quantity ( pcs.). Note 2 : Please order the embossed tape packaging product per reel. (1000 pcs. per reel) Note 3 : The vacuum area on the embossed tape product utilizes the connector case surface. However, it is necessary to check the previous vacuum, because the surface isn't always plain.
BRecommended PCB mounting pattern
Board
BApplication Pattern
Board
Board punching area
Note : The 2.9mm board to board size does not include the soldering paste thickness. Note : The shaded area indicates the through-hole area.
BTube Size
BEmbossed Carrier Tape Dimensions
Unit: mm Product Type DF9L-31P-1V Size Number of Contacts 31 A 32 B 28.4 C 14.2 D 32.4
A284
BPrecautions for Use
1. Recommended Temperature Profile (SMT)
Temperature
IR reflow condition Preheating area 150c Soldering area for 100 to 120 seconds
Maximum
2355c for 10 seconds max. 220c Min for 10 to 30 second
Preheating area
Soldering area
Time
Note 1 : Maximum twice action is allowed under the same condition. However, the interval between the first process and second actions must be maintained at the room temperature. Note 2 : The temperature indicates the board surface temperature in the connector lead area. 2. Recommended Manual Soldering Condition (SMT) 3. Recommended Screen Thickness (SMT) 4. Board Warp(SMT) 5. Cleaning Condition 6. Cautions Soldering iron temperature: 29010c, Soldering time: Within 2 seconds 0.15mm Maximum 0.03mm in the connector center area, based on both connector edges. Refer to the "Nylon Connector Use Hand book". s Avoid retaining the board with the connector only, and fix the board by any other means than the connector. s Where the board is not mounted, the insertion or extraction will cause damage or deformation in contacts. s Excessive scoop insertion or extraction may result in damage. s In the manual soldering process, don't carry out flux coating which will cause a flux blister on the connector. s The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot. However, the difference doesn't affect the performance.
A285

▲Up To Search▲

Price & Availability of DF9A-11P-1V

	To Download DF9A-11P-1V Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .